電纜式橋架為敞開式，線纜自然通風散熱，熱量不會聚集，橋架內溫度不會升高。因而線纜功能得到優化，能夠運用截面積更小的電纜，然后下降電纜收購本錢。

Cable type bridge is open type, natural ventilation and heat dissipation cable, heat will not gather, the temperature in the bridge will not rise. As a result, the cable function is optimized to use smaller cross-sectional cables, and then reduce the cost of cable acquisition.

由于線纜可見，要求施工時線纜次序擺放，并且電纜式橋架做工精細，更能按照客戶要求噴涂成各種色彩，整個體系在裝置結束后顯得很生動，打破曾經機房黑色或灰色為主調的煩悶氣氛。別的一種盛行的做法是選用本性的橋架但運用五顏六色電纜，由所以敞開橋架，所以裝置結束后也非常漂亮。

As the cable can be seen, the requirements for the construction of the cable sequence placed, and cable-type bridge work fine, can be sprayed into a variety of colors according to customer requirements, the whole system after the end of the device is very vivid, breaking the once black or gray room as the main tone of the boring atmosphere. Another popular method is to use the natural bridge but use colorful cables, so the bridge is open, so the end of the device is also very beautiful.

電纜式橋架雖然簡便，但并不獻身重要的承載功能。橋架選用直徑4mm-6mm的高品質鋼絲依據力學原理進行優化裝備混合，并選用特別訂制的焊接機進行橫縱穿插焊接及其側弦和頂弦的T型焊接，以到達每個焊點能承受500公斤的張力。T型焊接所形成的T型邊緣是電纜式橋架的全球，避免了焊接點的尖銳端面，不僅能保護線纜，對施工及裝置人員也更。

Cable bridge is simple but not dedicated to the most important bearing function. High-quality steel wires of 4mm-6mm diameter are selected to optimize the mixing of equipment according to mechanical principles, and special welding machines are selected for longitudinal and transverse interpolation welding and T-type welding of side chord and top chord to reach each solder joint which can withstand 500 kg tension. The safe T-edge formed by T-type welding is a global patent for cable-type bridge. It avoids the sharp end face of welded joints, not only protects the cable, but also is safer for construction and installation personnel.

(本文的精彩內容來自:濟南航豐實業有限公司，更多的詳細內容請山東電纜橋架官網：謝謝您的到來 http://m.bjxmj.com)

(The highlight of this article comes from: Jinan Hangfeng Industrial Co., Ltd., more details please Shandong cable bridge official website: Thank you for coming to http://m.bjxmj.com)