In today's social life, I believe most of my friends have a certain understanding of cable tray. Generally speaking, when it is parallel to or interpenetrating with other pipes, the distance of galvanized cable tray shall comply with relevant regulations. What are the methods to correctly use galvanized cable tray?

鍍鋅電纜橋架是利用電解設備將電纜橋架放入脫脂、酸洗后的鋅鹽溶液中，并與電解設備的負連接。鋅板放置在電纜橋架的對面，與電解設備的正連接，并與電源連接。通過電流從正向負的方向運動，會在電纜橋架上沉積一層鋅，鍍鋅電纜橋架先經過加工再鍍鋅，起到防腐的作用。

Galvanized cable tray is the negative connection between the cable tray and the electrolytic equipment by putting the cable tray into the zinc salt solution after degreasing and pickling. The zinc plate is placed opposite the cable tray, directly connected to the electrolytic equipment and connected to the power supply. If the current moves from positive to negative direction, a layer of zinc will be deposited on the cable tray. The galvanized cable tray will be processed first and then galvanized to prevent corrosion.

正確使用鍍鋅電纜橋架的方法有哪些?

What are the methods to correctly use galvanized cable tray?

電纜橋架不宜安裝在有化學腐蝕或熱力管道的氣體管道上方或有高腐蝕的液體管道下方。如果一定要做的話，就要做好防腐保溫工作。電纜橋架內的電纜應按以下部位進行固定。

The cable tray shall not be installed above the gas pipeline with chemical corrosion or thermal pipeline or below the liquid pipeline with high corrosion. If it must be done, it is necessary to do a good job in anti-corrosion and thermal insulation. The cables in the cable tray shall be fixed according to the following parts.

由于電纜橋架需要長時間暴露在露天中，電纜橋架的表面需要進行鍍鋅加固，所以也叫鍍鋅電纜橋架。經過鍍鋅后，整個電纜橋架的壽命大大延長，這基本上是由于鍍鋅工藝。

Because the cable tray needs to be exposed to the open air for a long time, the surface of the cable tray needs to be galvanized and reinforced, so it is also called galvanized cable tray. After galvanizing, the service life of the whole cable tray is greatly prolonged, which is basically due to the galvanizing process.

一般來說，鍍鋅電纜橋架分為熱鍍和冷鍍兩種，兩種鍍鋅方法各有優缺點。一般來說，熱浸鍍是在戶外使用的，因為熱浸鍍工藝可以在很大程度上提高抗能力，這樣在戶外工作的時候，就可以應對雨水、高溫等惡劣的環境。冷鍍經常在室內使用，冷鍍可以提高表面的亮度，使外觀更加明亮美觀。

Generally speaking, galvanized cable tray is divided into hot plating and cold plating. The two galvanizing methods have their own advantages and disadvantages. Generally speaking, hot-dip galvanizing is used outdoors, because the hot-dip galvanizing process can greatly improve the anti-corrosion ability, so that when working outdoors, it can deal with harsh environments such as rain and high temperature. Cold plating is often used indoors. Cold plating can improve the brightness of the surface and make the appearance brighter and beautiful.

以上就是濟南電纜橋架http://m.bjxmj.com為大家介紹的內容，感謝您在百忙之中查看我公司的信息內容，如果您想要了解的更多，歡迎您來電進行咨詢!

The above is Jinan cable tray http://m.bjxmj.com Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to call for consultation!